|
So while i was holding the center button for long enough during booting it started blinking purple then when release blinks green for sec then goes into regularly. If i also do same thing, but while holding down on blinking purple i quickly releasse then hold again i go into a color picker/chooser like thing consisting of green yellow and red and when release while choosing on whatever was displayed is chosen. Im really curious on what is all of that. |
Replies: 2 comments 2 replies
|
It's the standard advanced menu from the LEGO Spike Prime firmware. We use it too now. This makes it easier for us to do firmware updates or recovery. You won't have to use it. It does nothing for the Pybricks firmware. |
|
You discovered the bootloader UI. It is based on The version that is running on the hubs comes from LEGO, but is is very similar to the code at https://github.com/micropython/micropython/blob/master/ports/stm32/boards/LEGO_HUB_NO6/board_init.c
|
You discovered the bootloader UI. It is based on
mbootfrom MicroPython.The version that is running on the hubs comes from LEGO, but is is very similar to the code at https://github.com/micropython/micropython/blob/master/ports/stm32/boards/LEGO_HUB_NO6/board_init.c